Outboard Covers to suit the range of Evinrude Outboards
We have made outboard covers to suit motors going back to 1970's from 2hp - 300hp, but if we don't have it we will let you know when ordering......if your outboard is within 10 years old we have done it 99.9% sure!
As you are probably aware Outboard Covers Australia (OCA) make covers that are designed to suit a particular motor shape and size. So a 90hp Mercury will not fit a 90hp Evinrude as an example.
When you buy a cover from OCA we have already made the pattern for that particular motor shape and size. All we need from you the customer is the engine model number of the motor. Click here for leg measurement & ID plate details if you unsure of your motor year and leg length. |
Vinyl verses Polysoft outboard covers.....
Let's compare Apples
 with Apples
Click here for more
|
|
We have covers for ALL the E-TEC's in the market place today.
|
 |
 |
 |
 |
 |
 |
| " Splash® Cover to suit the New E-Tec" |
"Splash® Cover to suit Evinrude Ficht" |
"Splash® Cover to suit Ocean Pro 1998" |
" Splash® Cover
E-Tec Top Lid" |
" Full Cover to suit 175hp FICHT 1999" |
"Splash® Cover to suit FICHT 150hp" |
|
 |
 |
|
" Evinrude 175hp Splash Cover " |
" E-Tec 75 & 90hp " |
" NEW: 150, 175 & 200hp Evinrude E-Tec " |
 |
| " NEW Evinrude 130hp E-TEC " |
WHAT IS OUR RECOMMENDED COLOUR SCHEME??
We would always recommend that you keep the motor roughly the same colour. Our closest match is our light grey which would be used for white motors. If you have a dark navy coloured Evinrude then we would recommend our navy colour listed below.
Where do the colours go? Click here for more info. |
What is the difference between a Splash Cover and a Full Cover and a Combo?
The Splash Cover is the small cover located on the cowling only that you can leave on the motor when it is on the water operating or when being towed or stored. It's designed to primarily protect the cowling from damage such as fishing lures, sinkers, burlee, bait sticking to the cowling and general wear and tear!
The Full Cover is designed to be used when either storing or towing at high speeds. This cover protects the motor from stone damage when towing and scratches etc when being stored. Propellers today are worth a small fortune, can you afford not to have yours covered up out of the site??? Another use we hear of commonly is protection against insects getting into the exhaust port and water intakes building nests and of course blocking of these major ports, which can be a major problem!
The Combo Cover is just our way of saying both of the above covers is a cheaper way to buy them rather than buying them individually. To give you an idea if you buy the *full cover for $290.00 you would pay $170.00 just for the cowling or Splash cover but if you buy them together at the same time we will sell them BOTH to you for $345.00 !!! Saving you around $115.00.
(*Example is based on a 40hp 2cyl 2stk motor covers only)
|
|
|
|
There are many choices you can make when selecting colours, but as an example if you are looking at getting your cover very dusty we would recommend the burgundy with a darker colour.
Another example is those with Evinrude outboards normally go for the light grey with a black stripe to match the original motor colour. However, a charcoal main colour with a blue stripe looks OK as well.
But the choice is ultimately yours, you may wish to match up your outboard cover with the striping on the boat, seat or carpet colour's?
|
Printing Brand Logos: Click here for more information.
|
HOT NEWS:
As of the 1st December 2006 O.C.A. will be making a range of Splash Covers to suit all the E-TEC range of outboards for BRP (Johnson/ Evinrude). These covers will have all the striping's and logos on the original cowlings and will ONLY be available from your Johnson or Evinrude dealership across Australia!
When requesting your outboard from your dealership please quote the part numbers listed below for your model. Note OCA pricing will not be relavent to the price of these covers as you will be buying them direct from your local Johnson/Evinrude dealership.
NOTE: YOU CANNOT BUY THESE COVERS FROM O.C.A. DIRECT WITH ALL THE STRIPES ETC ON THEM, HOWEVER YOU STILL CAN GET OUR VERSION WITH EVINRUDE BRAND ONLY PRINTED ON THE COVER AS PICTURED ABOVE.
|
E-TEC 40, 50 & 60hp
Outboard Splash Cover |
PART NUMBER 99135 OR 99135B (for Navy Colour) |
| E-TEC 75 & 90hp
Outboard Splash Cover
|
PART NUMBER 99136 OR 99136B (for Navy Colour) |
| E-TEC 115hp
Outboard Splash Cover
|
PART NUMBER 99137 |
E-TEC 130hp (NEW)
Outboard Splash Cover |
PART NUMBER |
| E-TEC 150, 175 & 200hp (NOT HO)
Outboard Splash Cover
|
PART NUMBER 99138 |
| E-TEC 200, 225 & 250hp (HO)
Outboard Splash Cover
|
PART NUMBER 99139 |
| |
YOU MUST call your local Johnson/Evinrude dealership to order your new "genuine" BRP Splash Cover |
|
" Above 90hp E-Tec- All of these printed covers (with red stripe & E-Tec logos etc) are only available from your local Evinrude/Johnson Dealership using the part number above" |
|
 |
" The NEW 130hp E-Tec Splash Cover all of these printed covers (with red stripe & E-Tec logos etc) are only available from your local Evinrude/Johnson Dealership using the part number above" |
Pricing is ONLY available from your local Evinrude/Johnson dealership.
(OCA pricing is not applicable to these "genuine" BRP covers as they are made exclusively for BRP & they will have their own pricing on these covers.) |
|
EFT & Money Orders Welcome |
|
|
|
Boating Industry Association Member 2001- 2008 |
Electronic Funds Transfer & Aust. Post mail orders |
Visa |
MasterCard |
American
Express |
©Copyright 2009 Outboard Covers Australia |
|
